Austin 7

Manufacturer	Austin Motor Company
Production	1922–1939 290,000
Predecessor	None
Successor	Austin 8, Austin Big 7
Class	Subcompact car
Body style	Various, including vans
Engine	747 cc straight-4
Wheelbase	75 inches (1.905 m)

The Austin 7 was an economy car produced from 1922 until 1939 in the United Kingdom by the Austin Motor Company. Nicknamed the "Baby Austin", it was one of the most popular cars ever produced for the British market, and sold well abroad. It wiped out most other British small cars and cyclecars of the early 1920s;^[1] its effect on the British market was similar to that of the Model T Ford in the USA. It was also licensed and copied by companies all over the world.^[2] The very first BMW car, the BMW Dixi, was a licensed Austin 7, as were the original American Austins. In France they were made and sold as Rosengarts. In Japan Nissan also used the 7 design as the basis for their first cars, although not under licence.^[2]

Many Austin 7s were rebuilt as "specials" after the Second World War,^[3][4][5] including the first Lotus, the Lotus Mk1, which was based on an Austin 7.

Such was the power of the Austin 7 name that the company re-used it for early versions of the A30 in 1951^[6] and Mini in 1959.

History

Austin 7 Saloon 1931

Until the First World War Austin built mainly large cars, but in 1909 they sold a single-cylinder small car built by Swift of Coventry called the Austin 7 hp.^[7] After this they returned to bigger cars.

In 1920 Sir Herbert Austin commenced working on the concept of a smaller car, mainly to meet the needs of young families aspiring to own an affordable motor car. This idea was spurred on by the introduction of the Horsepower Tax in 1921. His design concept marked a departure from his company's conservative motoring past and Austin received considerable opposition from his board of directors and creditors. Because the company was in receivership Austin decided to carry out the project himself on his own account and in 1921 hired an 18 year old draughtsman, Stanley Edge, from the Austin factory at Longbridge, Birmingham to aid in the drawing of detailed plans. This work was carried out in the billiard room of Austin's Lickey Grange home.

Edge convinced Austin to use a small four-cylinder engine. The original side valve engine design featured a capacity of 696cc ( 55mm x 77mm ) giving a RAC rating of 7.2 hp, the cast cylinder block featured a detachable head and was mounted on an aluminium crankcase. The crankshaft used one ball and two roller bearings and the big-ends were splash lubricated. Edge also carried out the design of other mechanical components such as the three speed gearbox and clutch assembly. Austin was largely responsible for styling the Seven's design, which was reportedly influenced by the design of the Peugeot Quadrilette. The "A" frame chassis design was believed to have been influenced by the design of an American truck used in the Longbridge factory in the early 1920s.

The design was completed in 1922 and three prototypes were constructed in a special area of the Longbridge factory, and announced to the public in July 1922. Austin had put a large amount of his own money into the design and patented many of its innovations in his own name. In return for his investment he was paid a royalty of two guineas (£2, 2s), (£2.10) on every car sold.^[2]

Nearly 2,500 cars were made in the first year of production (1923), not as many as hoped, but within a few years the "big car in miniature" had wiped out the cyclecar industry and transformed the fortunes of the Austin Motor Co. By 1939 when production finally ended, 290,000 cars and vans had been made.

Chassis

The Austin 7 was considerably smaller than the Ford Model T. The wheelbase was only 6 ft 3 inches (1.905 m), and the track only 40 inches (1.016 m). Equally it was lighter - less than half the Ford's weight at 794 pounds (360 kg). The engine required for adequate performance was therefore equally reduced and the 747 cc sidevalve was quite capable with a modest 10 hp output.

The chassis took the form of an "A" with the engine mounted between the channel sections at the narrow front end. The rear suspension was by quarter elliptic springs cantilevered from the rear of the chassis while at the front the beam axle had a centrally mounted half elliptic transverse spring. Early cars did not have any shock absorbers. Brakes were on all wheels but at first the front brakes were operated by the handbrake and the rear by the footbrake, becoming fully coupled in 1930.

In late 1931 the chassis was lengthened by 6" with a corresponding increase in the rear track. Steering is by worm and wheel mechanism.

Engine and transmission

The original 1922 four-cylinder Austin Seven engine had a bore of 2.125" (54mm) and stroke of 3" (76mm), giving a capacity of 696 cc and RAC rating of 7.2 hp. From March 1923 the bore was increased to 2.2" (56mm) giving 747 cc and 10.5 hp. The side-valve engine was composed of an aluminium crankcase, cast iron cylinder block and cast iron cylinder head. Cooling was by thermosiphon, without a water pump, and the dynamo was driven from the timing gears.

The big end bearings were lubricated by jets from an oil gallery in the crankcase, the oil striking the crankshaft webs which were drilled accordingly. Originally the journal diameter was 1.125"; this was later increased to 1.3125". The three bearing engine (from 1936) used a white metal centre bearing.

The splash-lubricated crankshaft (pressure fed on some sports models) at first ran in two bearings (ball & roller at the front, roller at the back) changing to three in 1936. An electric starter was fitted from November 1923. The early cars used magneto ignition, but this was changed to coil in 1928.

The 3-speed and reverse gearbox was integral with the engine, and had a variety of ratios depending on application. A four-speed gearbox was introduced in 1932 and in 1933 synchromesh was added to third and top ratios extending to second gear in 1934.

The back axle was of spiral bevel type with ratios between 4.4:1 and 5.6:1. A short torque tube ran forward from the differential housing to a bearing and bracket on the rear axle cross member.

Reliant used a derivative of the Austin Seven engine for their early three-wheelers, before developing an aluminium alloy engine (used as the replacement for the Austin Seven engine by the 750 Motor Club in their Formula 750 motor sport).

Austin Seven Swallow

1931 Austin Seven Swallow saloon

1931 Austin 7 Swallow, rear quarter

In 1927, William Lyons, co-founder of the Swallow Sidecar Company, saw the commercial potential of producing a re-bodied Austin 7. Lyons commissioned the talented coach-builder Cyril Holland to produce a distinctive open tourer: the Austin Seven Swallow.

With its bright two-tone colour scheme and a style befitting more expensive cars of the time, together with its low cost (£175), the Swallow proved popular and was followed in 1928 by a saloon version: the Austin Seven Swallow Saloon.

Approximately 3,500 bodies of various styles were produced up until 1932, when Lyons started making complete cars under the SS brand.

Such was the demand for the Austin Seven Swallows that Lyons was forced to move in 1928 from Blackpool to new premises in Coventry. It was, in part, the success of the Swallows that laid the foundations of what was to become, by 1945, Jaguar Cars.^[8][9]

Licensed production

Versions of the Austin 7 were made under licence by American Austin from 1930, Dixi (later bought by BMW) in Germany from 1927 and Rosengart in France from 1928. In addition, rolling chassis were exported to Japan and Australia to have locally made bodies attached.

Australian Bodied Austin Seven's

In an attempt to establish an Australian motor industry after World War I, the Australian Government imposed a tax on imported cars. However, an imported chassis attracted minimal tax, and as a result Australian coach-builders imported rolling chassis to which they fitted custom-built bodies.

The largest and best known of these companies was Holden's Motor Body Builders. Holden was already manufacturing bodies for other marques, and in the mid-1920s commenced importing Austin Seven rolling chassis and building Australian-bodied Austin Seven tourers and roadsters.

1929 Australian-bodied Austin 7 Meteor (Coach-builder A. Robinson & Co.)

The first Australian coachbuilt Austin Seven sports model was built by New South Wales Motors in 1924, and was known as the Ace. The Wasp was built by the Melbourne Motor Body Company of 149 Little Lonsadale Street Melbourne in 1927 and William Green of Parramatta Road, Petersham Sydney in 1929. The Comet was another Australian-bodied sports model, built by Bill Conoulty of Sydney between 1933 and 1934. The Meteor sports model was produced by several coach-builders from 1928–1931, with James Flood of St Kilda Road Melbourne, Jack Lonzar of Adelaide and A Robinson & Co of 181 Castlereagh Street Sydney, producing limited numbers with variations on the design.

Layout

In 2007, during an episode of Top Gear, Jeremy Clarkson and James May studied a number of early car designs (including the Ford Model T and the De Dion-Bouton Model Q and concluded that the Austin Seven was the first mass-market car to be fitted with a "conventional" control layout, as found on modern cars (although the earliest car they found to use this layout was a Cadillac Type 53 in 1916).

Body styles

^[2]

Tourers

Austin 7 Chummy Tourer 1929

1934 Austin 7 two-seater (pre-Opal)

Saloons

Austin 7 Box Saloon 1933

Austin 7 "New Ruby" saloon

Cabriolet

Austin 7 Pearl Cabriolet 1935

Sports

Austin 7 Ulster 2-Seater Sports 1930

Austin 7 Nippy 2-Seater Sports 1934

Coupés

Vans

References