Harmonic mean

This MedLibrary.org supplementary page on Harmonic mean is provided directly from the open source Wikipedia as a service to our readers. Please see the note below on authorship of this content, as well as the Wikipedia usage guidelines. To search for other content from our encyclopedia supplement, please use the form below:

In mathematics, the harmonic mean (formerly sometimes called the subcontrary mean) is one of several kinds of average. Typically, it is appropriate for situations when the average of rates is desired.

The harmonic mean H of the positive real numbers x1, x2, ..., xn is defined to be

H = \frac{n}{\frac{1}{x_1} + \frac{1}{x_2} + \cdots + \frac{1}{x_n}} = \frac{n}{\sum_{i=1}^n 1/x_i}, \qquad x_i > 0 \text{ for all } i.

Equivalently, the harmonic mean is the reciprocal of the arithmetic mean of the reciprocals.

Contents

Relationship with other means

A geometric construction of the three Pythagorean means (of two numbers only). Harmonic mean denoted by HM in purple colour.
A geometric construction of the three Pythagorean means (of two numbers only). Harmonic mean denoted by HM in purple colour.

The harmonic mean is one of the three Pythagorean means. For a given data set, the harmonic mean is always the least of the three, while the arithmetic mean is always the greatest of the three and the geometric mean is always in between. When the data values to be averaged are equal to each other, the harmonic mean is equal to both the geometric mean and the arithmetic mean. For example, if the values are 2 and 2, the harmonic mean, geometric mean, and arithmetic mean are all equal (in this case, 2).

It is the special case M − 1 of the power mean.

Since the harmonic mean of a list of numbers tends strongly toward the least elements of the list, it tends (compared to the arithmetic mean) to mitigate the impact of large outliers and aggravate the impact of small ones.

The arithmetic mean is often incorrectly used in places calling for the harmonic mean.[1] In the speed example below for instance the arithmetic mean 50 is incorrect, and too big.

Weighted harmonic mean

If a set of weights w1, ..., wn is associated to the dataset x1, ..., xn, the weighted harmonic mean is defined by

\sum_{i=1}^n w_i \bigg/ \sum_{i=1}^n \frac{w_i}{x_i}.

The harmonic mean is the special case where all weights are equal to 1.

Examples

In physics

In certain situations, especially many situations involving rates and ratios, the harmonic mean provides the truest average. For instance, if a vehicle travels a certain distance at a speed x (e.g. 60 kilometres per hour) and then the same distance again at a speed y (e.g. 40 kilometres per hour), then its average speed is the harmonic mean of x and y (48 kilometres per hour), and its total travel time is the same as if it had traveled the whole distance at that average speed. However, if the vehicle travels for a certain amount of time at a speed x and then the same amount of time at a speed y, then its average speed is the arithmetic mean of x and y, which in the above example is 50 kilometres per hour. The same principle applies to more than two segments: given a series of sub-trips at different speeds, if each sub-trip covers the same distance, then the average speed is the harmonic mean of all the sub-trip speeds, and if each sub-trip takes the same amount of time, then the average speed is the arithmetic mean of all the sub-trip speeds. (If neither is the case, then a weighted harmonic mean or weighted arithmetic mean is needed.)

Similarly, if one connects two electrical resistors in parallel, one having resistance x (e.g. 60Ω) and one having resistance y (e.g. 40Ω), then the effect is the same as if one had used two resistors with the same resistance, both equal to the harmonic mean of x and y (48Ω): the equivalent resistance in either case is 24Ω (one-half of the harmonic mean). However, if one connects the resistors in series, then the average resistance is the arithmetic mean of x and y (with total resistance equal to the sum of x and y). And, as with previous example, the same principle applies when more than two resistors are connected, provided that all are in parallel or all are in series.

In other sciences

An interesting consequence arises from basic algebra in problems of working together. As an example, if a gas-powered pump can drain a pool in 4 hours and a battery-powered pump can drain the same pool in 6 hours, then it will take both pumps  \frac {{6} \cdot {4}} {{6} + {4}}, which is equal to 2.4 hours, to drain the pool together. Interestingly, this is one-half of the harmonic mean of 6 and 4.

Harmonic mean of two numbers

For the special case of just two numbers x1 and x2, the harmonic mean can be written

H = \frac{2 x_1 x_2}{x_1 + x_2}.

In this special case, the harmonic mean is related to the arithmetic mean A = (x1 + x2) / 2 and the geometric mean G = \sqrt{x_1 x_2}, by

H = \frac {G^2} {A}.

So G = \sqrt{A H}, which means the geometric mean, for two numbers, is the geometric mean of the arithmetic mean and the harmonic mean.

See also

References

  1. ^ *Statistical Analysis, Ya-lun Chou, Holt International, 1969, ISBN 0030730953

External links

Wikipedia content modification information:

  • This page was last modified on 2 October 2008, at 11:52.

Wikipedia Authorship and Review

Wikipedia content provided here is not reviewed directly by MedLibrary.org. Wikipedia content is authored by an open community of volunteers and is not produced by or in any way affiliated with MedLibrary.org.

Wikipedia Usage Guidelines

This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article on "Harmonic mean".

The URL for this specific entry is:

All Wikipedia text is available under the terms of the GNU Free Documentation License. (See Copyrights for details). Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.