This MedLibrary.org supplementary page on Hydrate is provided directly from the open source Wikipedia as a service to our readers. Please see the note below on authorship of this content, as well as the Wikipedia usage guidelines. To search for other content from our encyclopedia supplement, please use the form below:
Related Sponsors
Hydrate is a term used in inorganic chemistry and organic chemistry to indicate that a substance contains water. The chemical state of the water varies widely between hydrates, some of which were so labeled before their chemical structure was understood.
Contents |
Chemical nature of hydrates
In organic chemistry, a hydrate is a compound formed by the addition of water or its elements to a host molecule. For example, ethanol, CH3—CH2—OH, can be considered as a hydrate of ethylene, CH2=CH2, formed by the addition of H to one C and OH to the other C. A molecule of water may be eliminated, for example by the action of sulfuric acid. Another example is chloral hydrate, CCl3—CH(OH)2, which can be formed by reaction of water with chloral, CCl3—CH=O.
Molecules have been labeled as hydrates for historical reasons. Glucose, C6H12O6, was originally thought of as C6(H2O)6 and described as a carbohydrate, but this is a very poor description of its structure as known today. And methanol is often sold as “methyl hydrate”, implying an incorrect formula CH3OH2, although the correct formula is CH3—OH.
In inorganic chemistry, hydrates contain water molecules that are either bound to a metal center or crystallized with the metal complex. Such hydrates are also said to contain "water of crystallization" or "water of hydration". If the water is heavy water, where the hydrogen involved is the isotope deuterium, then the term deuterate may be used in place of hydrate.
_chloride.jpg)
-chloride-hexahydrate-sample.jpg)
A colorful example is cobalt(II) chloride, which turns from blue to magenta (red) upon hydration, and can therefore be used as a water indicator.
The notation of hydrous compound · nH2O, where n is the number of water molecules per molecule of salt, is commonly used to show that a salt is hydrated. The n is usually a low integer, though it is possible for fractional values to exist. In a monohydrate n is one, in a hexahydrate n is 6 etc. Such water is also referred to as water of crystallization. Examples include borax decahydrate, clathrate hydrates (a class of solid hydrates of gases), and chalcanthite. Gas hydrates are clathrate hydrates: water ice with gas molecules trapped within. When the gas is methane it is called a methane hydrate.
A hydrate which has lost water is referred to as an anhydride, and can normally lose further water only upon strong heating, if at all. A substance that does not contain any water is referred to as anhydrous.
Applications of hydrates
Construction
Generally, in construction and refractories, inorganic binders are often deprived of water during manufacture. For instance, both in cement and gypsum products, heat is applied to the raw materials. Once water is added on a construction site, the powder is re-hydrated and able to form bonds with other substances that are present. Thus, one goes from powder, to slurry, or paste and then forms "cement stone". Water that is not chemically bound, or converted into hydrates, can come off again as steam, especially due to the heat of hydration, with cement products in particular, which undergo an exothermic chemical reaction with water.
Generally, the longer one can keep cementitious products wet immediately after placement, the better. The wetter cementitious products are kept, the more water will be converted into hydrates, instead of evaporating off due to the heat of hydration and other environmental influences. Premature drying is a cause for severe concrete problems, such as cracking and shrinking.
Passive fire protection (PFP)
Avoiding premature drying is important to all other cementitious building products, particularly spray fireproofing and firestop mortars, where the slightest cracking can lead to rejection. The chemically bound water is used up by endothermic reactions when exposed to the heat of a fire. Fire temperatures in a building can reach 1100°C, depending on the fuel present and the availability of oxygen, but the hydrates keep the temperature of the item at or below 100 °C until all the water is spent. Therefore, the more hydrates, the longer the fire-resistance duration. This is what lends fire-resistive characteristics to basic, or "old" building materials, like gypsum, concrete or plaster.
Fire-resistance duration is important to many high-tech PFP products such as intumescent and endothermic paints, wraps and tiles, such as those used in space physics for re-entry vehicles.
See also
Wikipedia content modification information:
- This page was last modified on 11 October 2008, at 05:24.
Wikipedia Authorship and Review
Wikipedia content provided here is not reviewed directly by MedLibrary.org. Wikipedia content is authored by an open community of volunteers and is not produced by or in any way affiliated with MedLibrary.org.
Wikipedia Usage Guidelines
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article on "Hydrate".
The URL for this specific entry is:
All Wikipedia text is available under the terms of the GNU Free Documentation License. (See Copyrights for details). Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.