Ostwald process

This MedLibrary.org supplementary page on Ostwald process is provided directly from the open source Wikipedia as a service to our readers. Please see the note below on authorship of this content, as well as the Wikipedia usage guidelines. To search for other content from our encyclopedia supplement, please use the form below:

The Ostwald process is a chemical process for producing nitric acid, which was developed by Wilhelm Ostwald (patented 1902). It is a mainstay of the modern chemical industry. Historically and practically it is closely associated with the Haber process, which provides the requisite raw material, ammonia.

Contents

Description

Ammonia is converted to nitric acid in two stages. It is oxidized (in a sense "burnt") by heating with oxygen in the presence of a catalyst such as platinum with 10% rhodium, to form nitric oxide and water. This step is strongly exothermic, making it a useful heat source once initiated (ΔH = -908 kJ):

4NH3(g) + 5O2(g) → 4NO(g) + 6H2O(g)

Stage two (combining two reaction steps) is carried out in the presence of water in an absorption apparatus. Initially nitric oxide is oxidized again to yield nitrogen dioxide:

2NO(g) + O2(g) → 2NO2(g)

This gas is then readily absorbed by the water, yielding the desired product (nitric acid, albeit in a dilute form), while reducing a portion of it back to nitric oxide:

3NO2(g) + H2O(l) → 2HNO3(aq) + NO(g)

The NO is recycled, and the acid is concentrated to the required strength by distillation.

Alternatively, if the last step is carried out in air:

4NO2(g) + O2(g) + 2H2O(l) → 4HNO3(aq)

Typical conditions for the first stage, which contribute to an overall yield of about 96%, are:

History

An earlier patent (Kuhlmann, 1838) described the basic chemistry[1], but ammonia (from animal sources) was scarce at the time, so it was probably of only academic interest, either then or when Ostwald patented his version in 1902. A later date is frequently given for the development of the process (1908), and it may be that by then Fritz Haber's method of making ammonia was known, which would have changed the outlook entirely. Ostwald's primary contributions seem to have been practical ones concerning the catalyst and operating conditions, a matter perhaps more of chemical engineering than of basic science.

Prior to this the source of most industrial nitrogen were nitrate ores, primarily imported Chile saltpeter, from which nitric acid was produced by treatment with sulfuric acid. The Ostwald process gained prominence as an adjunct to the fixing of nitrogen (Haber Process).The combined processes undoubtedly prolonged World War I, when Germany's overseas sources were cut off and explosives production was threatened. Subsequently their use of widely available raw materials (and the resulting low cost) led to their general adoption, resulting in vastly increased nitrogen consumption, mostly as fertilizers.

Initially the process was carried out in low pressure stoneware vessels, but the introduction of stainless steel made higher pressures practical, leading to higher yields.

External links

References

  1. ^ Fr. Kuhlmann: "Abhandlung über die Salpeterbildung. Neue Erzeugung von Salpetersäure und Ammoniak." in: "Annalen der Pharmacie" 29(1), 1839, p. 272–279. (doi:10.1002/jlac.18390290305,ISSN 0365-5490)

Wikipedia content modification information:

  • This page was last modified on 9 October 2008, at 02:42.

Wikipedia Authorship and Review

Wikipedia content provided here is not reviewed directly by MedLibrary.org. Wikipedia content is authored by an open community of volunteers and is not produced by or in any way affiliated with MedLibrary.org.

Wikipedia Usage Guidelines

This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article on "Ostwald process".

The URL for this specific entry is:

All Wikipedia text is available under the terms of the GNU Free Documentation License. (See Copyrights for details). Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc.